Hover-1 Eagle LED Headlight Replacement

Введение

This guide will walk you through how to replace a faulty or non-functional LED headlight on a Hover-1 Eagle scooter. You should replace your headlight if your headlight no longer turns on or appears cracked or damaged. To determine if you need to replace your headlight, refer to our Troubleshooting Guide.

Выберете то, что вам нужно

Шаг 1 LED Headlight

Hover-1 Eagle LED Headlight Replacement, LED Headlight: шаг 1, изображение 1 из 3

Hover-1 Eagle LED Headlight Replacement, LED Headlight: шаг 1, изображение 2 из 3

Hover-1 Eagle LED Headlight Replacement, LED Headlight: шаг 1, изображение 3 из 3

Remove the four screws from the bottom side of the display housing using a Phillips #2 screwdriver.

Редактировать

Шаг 2

Hover-1 Eagle LED Headlight Replacement: шаг 2, изображение 3 из 3

Carefully remove the top of the housing containing the display screen.
Remove the top of the housing slowly to avoid damaging the wires.

Редактировать

Шаг 3

Slide the LED light cover upwards out of the display housing
Be gentle when removing the LED light cover to avoid damaging the LED's connecting wires.
The LED circuit board should slide out with the LED light cover.
To reassemble, align the prongs of the LED cover with the holes in the LED circuit board.

Редактировать

Шаг 4

Hover-1 Eagle LED Headlight Replacement: шаг 4, изображение 3 из 3

Using a soldering iron, desolder the black and red wires from the LED circuit board.
To reassemble, solder the same black and red wires onto the new LED circuit board.

Редактировать