Перейти к основному содержанию

Введение

Use this guide to open your Huawei P9 smartphone.

  1. First switch off your phone and remove the SIM card tray. Unscrew the two Pentalobe P2 screws located at the bottom next to the device's USB C port. If the screen is cracked you might want to use some tape to protect your eyes from glass shreds and get a better grip to open the phone.
    • First switch off your phone and remove the SIM card tray.

    • Unscrew the two Pentalobe P2 screws located at the bottom next to the device's USB C port.

    • If the screen is cracked you might want to use some tape to protect your eyes from glass shreds and get a better grip to open the phone.

  2. Комплект инструментов для замены батареи Macbook

    Доступно с $69.99

    Buy Now

    Комплект инструментов для замены батареи Macbook

    Доступно с $69.99

    Buy Now
  3. Use an iSclack or a suction handle to separate the display unit from the rear panel. Don't remove the rear panel completely yet. There is a cable connected to it! It is running from the finger print sensor to the display unit.
    • Use an iSclack or a suction handle to separate the display unit from the rear panel.

    • Don't remove the rear panel completely yet. There is a cable connected to it! It is running from the finger print sensor to the display unit.

  4. Disconnect the finger print sensor using a spudger. Disconnect the finger print sensor using a spudger.
    • Disconnect the finger print sensor using a spudger.

Заключение

To reassemble your device, follow these instructions in reverse order.

5 участников успешно повторили данное руководство.

Tobias Isakeit

Участник с: 31.03.2014

48 429 Репутация

Автор 109 руководств

Команда

iFixit Member of iFixit

Community

98 членов

Автор 9 004 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 5

За 7 дней: 20

За 30 дней: 101

За всё время: 5,039