Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Введение

Follow this guide to remove the metal housing for your Mac Pro in order to access the internals. This simple procedure requires no tools.

The Mac Pro will not turn on when the housing is removed.

  1. Shut down your Mac Pro. Touch the metal housing with a bare hand to discharge any static electricity. Unplug all cables from the Mac Pro, including the power cable.
    • Shut down your Mac Pro.

    • Touch the metal housing with a bare hand to discharge any static electricity.

    • Unplug all cables from the Mac Pro, including the power cable.

  2. Lift the top latch up from its recess. Twist the latch counter-clockwise until it won't turn anymore—about a quarter-turn. Slowly lift the housing up by the latch.
    • Lift the top latch up from its recess.

    • Twist the latch counter-clockwise until it won't turn anymore—about a quarter-turn.

    • Slowly lift the housing up by the latch.

  3. Remove the housing.
    • Remove the housing.

Заключение

To reinstall the housing, follow these instructions in reverse order.

Arthur Shi

Участник с: 03.01.2018

84 319 Репутация

Автор 263 руководств

Команда

iFixit Участник iFixit

Community

108 членов

Автор 9 949 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За последние 24часов: 2

За последние 7 дней: 46

За последние 30 дней: 119

За всё время: 119