Перейти к основному содержанию

Removing Texas Instruments TI-92 Back Cover

  1. Removing Texas Instruments TI-92 Back Cover, Back Cover: шаг 1, изображение 1 из 3 Removing Texas Instruments TI-92 Back Cover, Back Cover: шаг 1, изображение 2 из 3 Removing Texas Instruments TI-92 Back Cover, Back Cover: шаг 1, изображение 3 из 3
    • The first step to any repair operation is to remove the front cover.

    • Grab the back of the calculator with one hand and the cover with the other.

    • Pull the cover off from one of the sides for easy removal.

  2. Removing Texas Instruments TI-92 Back Cover: шаг 2, изображение 1 из 2 Removing Texas Instruments TI-92 Back Cover: шаг 2, изображение 2 из 2
    • Orientate the calculator with the top facing towards you.

    • Slide the locking tab,found on the top part of the calculator, to the unlock position.

  3. Removing Texas Instruments TI-92 Back Cover: шаг 3, изображение 1 из 2 Removing Texas Instruments TI-92 Back Cover: шаг 3, изображение 2 из 2
    • "Locking Tab"

    • To remove the back cover, slide the cover away from the locking tab towards the bottom of the calculator until the cover no longer slides.

    • Then with the front of the calculator facing down, pull up on the back cover.

    • The calculator should now be orientated with the front facing down, as shown in picture 2.

Заключение

To reassemble your device, follow these instructions in reverse order.

Daniel Maldonado

Участник с: 04/14/10

240 Репутация

Автор 9 руководств

Команда

Cal Poly, Team 15-51, Garner Spring 2010 Участник Cal Poly, Team 15-51, Garner Spring 2010

CPSU-GARNER-S10S15G51

5 членов

Автор 9 руководств

0 Комментариев

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 1

За последние 30 дней: 18

За всё время: 3,289