Введение
Note: The best time to do this is when the system is new. There may be a visible contrast on older systems.
On many PCs the OEMs put stickers which are prone to poorly wearing on laptops. Removing these stickers can improve device cosmetics in the long term.
Guide notes
- The battery must be removed if it is easily accessible or in the line of heat. They can explode if they get too hot!
- Follow the guide specific to your laptop. All laptops are different.
- Be careful how much heat is used. Plastic parts can melt if they get too hot. These will need to be replaced if this happens.
- To avoid damaging the plastics, only use enough heat to remove the stickers.
- Goof Off WILL DAMAGE PLASTIC. Use Goo Gone, as it is safer for most surfaces.
- If you are in uncomfortable using solvents, a piece of tape works.
------------------------------------------------------------------------------------------------------------------------------
Annoying OEM stickers
- Windows XP/Vista
- Intel (all)
- AMD CPU (pre-2011)
Guide Notes
- This procedure can be used to remove most stickers; not just OEM case stickers. These were selected on this laptop as a common example.
- While some stickers can be harder than others (often due to age or adhesive used), the same procedure applies.
Инструменты
Запчасти
-
-
Before removing the stickers, remove the battery.
-
-
-
After removing the battery, warm up the palmrest with a hairdryer until it is warm to the touch.
-
Peel the stickers off.
-
-
-
After the sticker(s) have been removed, clean the residual glue with a small amount of gentle solvent.
-
Clean the solvent after a few seconds.
-
Отменить: Я не выполнил это руководство.
2 участников успешно повторили данное руководство.
Один комментарий
Very helpful article. You can also read how to remove stickers from laptops here: https://laptopsstudio.com/how-to-remove-.... Thanks.