Введение

The HEPA filter removes at least 99% of airborne particles such as pollen and dander. This guide allows you to access this filter, which is trickier to get to than the other filters.

  1. Look towards the side of the vacuum for the orange "Floor Nozzle" button. Press the  "Floor Nozzle" button and pull out the body of the vacuum up and away from the floor motor.
    • Look towards the side of the vacuum for the orange "Floor Nozzle" button.

    • Press the "Floor Nozzle" button and pull out the body of the vacuum up and away from the floor motor.

  2. Free shipping on all orders over 100 $ or containing a Pro Tech Toolkit!

    Посмотрите наш магазин
  3. Locate an orange dial at the bottom of the  now-separate body of the vacuum. Turn the dial so that it is pointed towards the open-lock icon. Turn the dial so that it is pointed towards the open-lock icon.
    • Locate an orange dial at the bottom of the now-separate body of the vacuum.

    • Turn the dial so that it is pointed towards the open-lock icon.

  4. Open the cap to reveal the HEPA filter. The HEPA filter is a large grey rectangle with a tab on the side. Press the tab, and pull out  the filter. Press the tab, and pull out  the filter.
    • Open the cap to reveal the HEPA filter. The HEPA filter is a large grey rectangle with a tab on the side.

    • Press the tab, and pull out the filter.

Заключение

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

David Chau

Участник с: 24.01.2018

121 Репутация

1 Guide authored

Команда

Cal Poly, Team S18-G6, Livingston Winter 2018 Member of Cal Poly, Team S18-G6, Livingston Winter 2018

CPSU-LIVINGSTON-W18S18G6

4 членов

Автор 5 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 1

За 7 дней: 7

За 30 дней: 36

За всё время: 376