Введение

This guide covers the Sony Xperia XZ Premium frame removal.

Запчасти

Никакие детали не требуются.

Place a heated iOpener on the back panel of the phone to melt the adhesive inside.
  • Place a heated iOpener on the back panel of the phone to melt the adhesive inside.

  • The iOpener or your desired heat source can be very hot and can heat up the phone, so make sure you do not burn yourself.

  • Follow this guide for directions on using the iOpener.

Добавить комментарий

Slide a thin plastic card under the back panel and around the perimeter of the phone to remove the adhesive.
  • Slide a thin plastic card under the back panel and around the perimeter of the phone to remove the adhesive.

Добавить комментарий

  • Take hold of the back panel with your fingers and remove.

Добавить комментарий

  • Orient the phone horizontally with the front screen facing down and the camera on the bottom left corner.

Добавить комментарий

  • Remove nine 3.9mm Phillips #000 screws.

  • Make sure to turn carefully in the counter-clockwise direction or you may wear out the thread and shape of the screws. You will not be able to remove the screws once they are damaged!

  • When unscrewing, remember "Left Loosey, Righty Tighty!"

Добавить комментарий

  • Place the spudger under the top left corner frame piece and lift to loosen.

Добавить комментарий

  • Grab hold of the top left frame piece with your fingers and gently wiggle and lift to remove.

Добавить комментарий

  • Place the spudger under the bottom left frame piece and lift to loosen it.

Добавить комментарий

  • Grab hold of bottom left frame piece with your fingers and lift gently.

  • When dislodging the left frame piece, carefully wiggle the piece while lifting it vertically to prevent any damage to the wedges on the frame. This applies for all of the other frame pieces you will remove after this step!

Добавить комментарий

  • Place the spudger under the top right frame piece and lift to loosen it.

Добавить комментарий

  • Grab hold of the top right frame piece with your fingers and lift.

Добавить комментарий

Заключение

To reassemble your device, follow these instructions in reverse order.

Gelene Amog

Участник с: 18.04.2018

759 Репутация

Автор 5 руководств

Команда

Cal Poly, Team S18-G2, Livingston Spring 2018 Member of Cal Poly, Team S18-G2, Livingston Spring 2018

CPSU-LIVINGSTON-S18S18G2

5 членов

Автор 6 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 2

За 7 дней: 9

За 30 дней: 51

За всё время: 243