Запчасти

  1. The assembled mixer.
    • The assembled mixer.

  2. To disassemble the 3 parts you've got to disconnect the little ring. Use a screw driver to get the ring loose. To disassemble the 3 parts you've got to disconnect the little ring. Use a screw driver to get the ring loose. To disassemble the 3 parts you've got to disconnect the little ring. Use a screw driver to get the ring loose.
    • To disassemble the 3 parts you've got to disconnect the little ring. Use a screw driver to get the ring loose.

  3. Free shipping on all orders over 100 $ or containing a Pro Tech Toolkit!

    Посмотрите наш магазин
  4. Unscrew 3 screws to open the casing. Unscrew 3 screws to open the casing. Unscrew 3 screws to open the casing.
    • Unscrew 3 screws to open the casing.

  5. Unscrew 4 screws to  disassemble the  printplate and 2 to unscrew the wiring.  Then you can lift the motor out by hand. Unscrew 4 screws to  disassemble the  printplate and 2 to unscrew the wiring.  Then you can lift the motor out by hand. Unscrew 4 screws to  disassemble the  printplate and 2 to unscrew the wiring.  Then you can lift the motor out by hand.
    • Unscrew 4 screws to disassemble the printplate and 2 to unscrew the wiring. Then you can lift the motor out by hand.

  6. To disassemble the motor holders you can slide them of the casing. To disassemble the motor holders you can slide them of the casing.
    • To disassemble the motor holders you can slide them of the casing.

Заключение

un-screw 3 screw froms the housing

koen merkx

Участник с: 07.03.2018

121 Репутация

1 Guide authored

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 0

За 7 дней: 1

За 30 дней: 5

За всё время: 147