Почините Свои Вещи Сообщество Магазин

​Вступительная история: iPhone 16 Pro Max Taptic Engine Replacement

Отредактированно Arthur Shi -

Правка одобрена автор Arthur Shi

До
После
Без изменений
Introduction
This guide shows how to remove and replace the Taptic Engine in your iPhone 16 Pro Max.
If you're getting ''bad vibrations'' from your iPhone, you might need to replace the Taptic Engine (I totally understand if this is too cringy to keep).
You'll need replacement back glass adhesive to complete this repair.
Conclusion
***To reassemble your device, follow these instructions in reverse order.***
After your repair, calibrate a genuine replacement part [link|https://support.apple.com/en-us/120579|using Apple's Repair Assistant|new_window=true]. Navigate to Settings ***→*** General ***→*** About ***→*** Parts & Service History, tap Restart & Finish Repair, and follow the onscreen prompts.
Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting]], or ask our [link|https://www.ifixit.com/Answers/Device/iPhone_16_Pro_Max|Answers community] for help.