Почините Свои Вещи Сообщество Магазин

​Вступительная история: iPhone 16 Pro Max Taptic Engine Removal

Отредактированно Arthur Shi -

Правка одобрена автор Arthur Shi

До
После
Без изменений
Устройство
iPhone 16 Pro Max
Type
replacement
Thing
Taptic Engine
Title
iPhone 16 Pro Max Taptic Engine Replacement
Introduction
This guide shows how to remove and replace the Taptic Engine in your iPhone 16 Pro Max.
If you're getting weak or no vibrations from your iPhone, you might need to replace the Taptic Engine.
You'll need replacement back glass adhesive to complete this repair.
Time Required Min
1 час
Time Required Max
2 час(ов)
Imageid
До
После
Difficulty
Moderate
Conclusion
***To reassemble your iPhone, follow these instructions in reverse order.***
Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting]], or ask our [link|https://www.ifixit.com/Answers/Device/iPhone_16_Pro_Max|Answers community] for help.
Author
Arthur Shi
Public
Да

Инструменты

  • P2 Pentalobe Screwdriver iPhone x1 added.
  • Tri-point Y000 Screwdriver x1 added.
  • Phillips #000 Screwdriver x1 added.
  • iFixit Opening Picks (Set of 6) x1 added.
  • Suction Handle x1 added.
  • Spudger x1 added.
  • Hair Dryer x1 added.
  • Isopropyl Alcohol (90% or Greater) x1 added.
  • Coffee Filters or a lint-free cloth x1 added.
  • Packing Tape x1 added.
  • Heat Gun x1 added.
  • iOpener x1 added.
  • Tweezers x1 added.
  • Clampy - Anti-Clamp x1 added.

Запчасти

  • Tesa 61395 Tape x1 added.