| | [* black] There are no screws that hold the front bezel to the rest of the screen. |
|---|
| | [* black] Simply pick a corner at the bottom of the screen and pry the bezel from its binding clips around the screen. There is a little tape over the inverter board, but it is nothing you can not overcome already. |
|---|
| | [* icon_note] Make sure to release the clip that binds the hinge covers together, indicated by the second picture. |
|---|
| | [* icon_caution] The front bezel is somewhat thin and delicate and can be broken if you are not careful. |
|---|