История iPad Pro 12.9" Display Assembly Replacement Шага #23

Возврат к шагу #23

Отредактированно Arthur Shi - 7 сен 2023 г.

Правка одобрена автор Arthur Shi

	[* icon_note] The display cables in this iPad are very short. Read the next two steps before you proceed.
-	[* icon_caution] *Do not pivot the screen about the lower edge.* The display cables don't have enough slack to allow for this and will tear if you do not slide the screen towards the front-facing camera as you lift.
-	[* icon_caution] The display cables will tear if you raise the screen more than 80º.
+	[* icon_caution] *Do not tilt the screen about the lower edge.* The display cables don't have enough slack to allow for this.
	[* black] Lift up the upper edge of the screen and slide the entire screen towards the front-facing camera to access the iPad's internal components.
+	[* icon_caution] The display cables will tear if you raise the screen more than 80 degrees.
	[* black] Use masking tape to tape the lower edge of the screen to the frame to prevent the screen from slipping.