Перейти к основному содержанию

Возврат к шагу #5

Отредактированно Arthur Shi -

Правка одобрена автор Arthur Shi

До
После
Без изменений

Шаг Линий

-[title] Disconnect the face sensor
+[title] Reposition the eyepiece trim
[* icon_caution] Don’t try to fully remove the eyepiece trim in this step. It’s still connected to the headset by a short cable.
-[* black] Lift the eyepiece trim up slightly and tilt it towards the top edge of the headset.
+[* black] Lift the eyepiece trim slightly and tilt it towards the top edge of the headset.
[* black] Set the trim down on your work surface, making sure not to strain the cable.