Возврат к шагу #2
Отредактированно Arthur Shi -
Правка одобрена автор Arthur Shi
- До
- После
- Без изменений
Шаг Линий
| [* black] Use your fingers to lift the heat sink and remove it. | |
| + | [* icon_note] You may feel a bit of resistance. This is normal since the midframe is slightly bonded to the heat sink with thermal paste. |
| [* icon_note] You can reuse the thermal paste if you keep it clean. Otherwise, use a spudger to scrape off the old paste and apply a small amount of viscous thermal compound (such as K5 Pro) to the processor. |