Возврат к шагу #8
Отредактированно Arthur Shi -
Правка одобрена автор Arthur Shi
- До
- После
- Без изменений
Шаг Линий
| [title] Remove the logic board | |
| [* icon_caution] ***If your iPhone has a physical SIM tray, eject it before you proceed.*** | |
| [* icon_caution] Make sure all the connectors are disconnected from the top of the logic board. | |
| - | [* black] Insert the flat edge of an opening pick between the battery and the logic board. Hold the pick in place with your fingers. |
| + | [* black] Insert the flat edge of an opening pick between the battery and the left edge of the logic board. Hold the pick in place with your fingers. |
| [* black] Insert the flat end of a spudger underneath the right edge of the logic board. | |
| [* black] Gently pry with the spudger to lift the logic board and disconnect the display connector. | |
| [* icon_caution] Don't remove the logic board yet. There's still a cable connected to the bottom side. | |
| - | [* black] Flip the logic board over, being careful not to strain the connected cable. |