Перейти к основному содержанию

Возврат к шагу #3

Отредактированно Taylor Dixon -

Правка одобрена автор Taylor Dixon

До
После
Без изменений

Шаг Линий

[* black] Use the point of a spudger to gently lift the battery connector up off its socket on the logic board.
-[* icon_caution] Be very careful to only pry up on the battery connector and not on the socket itself. If you pry up on the logic board socket, you may break the connector entirely.
-[* icon_caution] If you don't disconnect the battery first you are likely to blow the backlight fuse.
+ [* icon_note] Be very careful to only pry up the battery connector, not the socket itself. If you pry up on the logic board socket, you may break the connector entirely.
+[* icon_caution] Make sure to pry up the battery connector before attempting any other repairs inside the device.