Возврат к шагу #3
Отредактированно jkgarrett17 -
- До
- После
- Без изменений
Шаг Линий
| - | [* black] Use a T-6 Torx bit to adjust the tightness of |
|---|---|
| + | [* black] Use a T-6 Torx bit to adjust the tightness of the little screw highlighted in red in the bottom-left corner of the device (top-down). |
| [* black] If the right click works but the left click doesn't, you'll need to turn the screw clockwise. | |
| [* black] Note: right and left clicks are determined by the Trackpad top, not the view from the bottom as you are adjust the screw. | |
| [* black] If neither the right click nor left click work, turn it counter-clockwise if there is no movement at all, and clockwise if there is movement but it is too soft to click. |