Изменения в этом шаге
Отредактированно Patrick Finnerty -
Правка одобрена автор Craig Lloyd
- До
- После
- Без изменений
Шаг Линий
| + | [* black] Thoroughly clean the edges of the frame. You need to make sure that all the glue that was keeping the old screen attached to the frame is removed. This will ensure that the new screen and digitizer assembly fits properly in the frame with the replacement adhesive. |
|---|---|
| + | [* black] This step can be tedious if you had a shattered screen. Be patient and remove every single shard. Be careful not to hurt yourself against any sharp edges. |
Изображение 1
Нет предыдущего изображения
Добавлено