Перейти к основному содержанию

Изменения в этом шаге

Отредактированно Arthur Shi -

Правка одобрена автор Arthur Shi

До
После
Без изменений

Шаг Линий

[* icon_note] In order for the microphone to not be blocked by adhesive, strip 4R must be modified before use.
[* black] Measure 1.5 inches (38 mm) from the right edge of strip 4R and mark it with a pen.
[* black] Cut the mark with a pair of scissors.
-[* red] Note that the shortened 4R strip should be aligned such that the adhesive extends to the right edge while ending right before the microphone hole on the left.
+[* red] The shortened 4R strip should now be aligned such that the adhesive extends to the right edge while ending right before the microphone hole on the left.