Перейти к основному содержанию
Помощь
Редактирование шага 8 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 7 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

The top edge of the display is secured with both glue and clips.

Slide the opening pick around the top corner of the display, while gently pulling or wiggling the display down in the direction of the Lightning port.

The clips will break if you use too much force. Work carefully and be patient.

Again, don't insert the pick more than a few millimeters—about the width of the display bezel—or you may damage the front panel sensor array.

Slide the pick to the opposite corner and cut any remaining adhesive securing the display.

Ваш вклад лицензируется под свободной лицензией Creative Commons.