Перейти к основному содержанию
Помощь
Редактирование шага 25 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 6 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Continue rotating the board toward yourself until you have enough room to reach the SATA connector (shown in red).

Insert the blunt end of a metal spudger between the SATA connector and its socket. Twist the shaft of the metal spudger to separate the connector from its socket.

Disconnect the SATA cable from the logic board.

Lift the logic board out of the rear case by its edges, minding any cables that may get caught.

Ваш вклад лицензируется под свободной лицензией Creative Commons.