Перейти к основному содержанию
Помощь
Редактирование шага 2 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

The brackets are lightly adhered in place.

Gently lift to unstick and remove each bracket, being careful not to bend it.

If necessary, apply a little heat with a hair dryer or heat gun to soften the adhesive. (Putting an iOpener on the brackets is not recommended, as this may bend the spring contacts along the top.)

Ваш вклад лицензируется под свободной лицензией Creative Commons.