Skip to main content
Редактирование шага 1 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 8 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Peel up and remove the large rectangular battery board cover, on the edge of the logic board nearest the battery.

If the cover doesn't peel up easily, apply mild heat with an iOpener, hair dryer, or heat gun to soften the adhesive underneath, and try again.

If the cover doesn't seat securely during reassembly, try rotating it 180 degrees. It must be oriented correctly in order for the adhesive pads underneath to contact the board screws.

Ваш вклад лицензируется под свободной лицензией Creative Commons.