Перейти к основному содержанию
Редактирование шага 3 —

Тип шага:

Перетащите чтобы изменить порядок

Peel one of the end adhesive strips from the clear plastic backing.

The strips are cut for a specific end and are not interchangeable.

Hold the strip by the two green end tabs and line the adhesive strip with the phone frame.

Lay the adhesive down lightly on the phone. Make sure that all cutouts are properly aligned.

Once aligned, use your fingers to press the adhesive into place.

Repeat the procedure for the remaining adhesive strip.

Ваш вклад лицензируется под свободной лицензией Creative Commons.