Перейти к основному содержанию
Редактирование шага 4 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 16 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Remove the following screws from the front of the logic board:

Two 23.7 mm T10 screws

Four 7.4 mm T10 screws

One 20.8 mm T25 spacer screw

One captive T10 screw

This screw is beneath a hole in the logic board. You'll need a fixed screwdriver or the 60 mm extension from an iFixit driver kit to reach it.

Ваш вклад лицензируется под свободной лицензией Creative Commons.