Use your blunt nose tweezers to grip the entire length of an adhesive strip's pull tab.

Twist your tweezers to roll the adhesive strip over itself and pull it slowly, evenly, and at a low angle out from under the battery.

Give the strip plenty of time to stretch. Avoid dragging it over cables or components as you pull.

If you're using your fingers, re-grip the strip often to avoid it stretching unevenly and tearing.

Repeat for the other strip.

If a strip breaks off, try to retrieve it from under the battery. If you can't retrieve it, don't worry! Move on to the next step for an alternate method.