Перейти к основному содержанию
Помощь

MacBook Unibody Model A1342 Lower Case Replacement

Редактирование шага 2 —

% 1 Примечание:% 2 Сейчас вы редактируете исходное руководство для только что просматриваемого руководства. Любые внесённые вами изменения влияют на все направляющие% 3, включающие данный шаг.

Тип шага:

Перетащите чтобы изменить порядок

The lower case is constructed of rubber-coated aluminum. Do not excessively bend the aluminum during removal, as any permanent deformation will cause tolerance issues after reassembly.

Slightly lift the lower case near the vent opening.

Continue running your fingers between the lower and upper cases until the upper case pops off its retaining clips.

The location of these three clips is shown in the third picture.

Ваш вклад лицензируется под свободной лицензией Creative Commons .