Перейти к основному содержанию
Помощь
Редактирование шага 10 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 42 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

In the next few steps, you'll be sliding a spudger between the LCD and the metal backing plate to fully separate the LCD from the adhesive beneath.

Insert the flat end of a spudger between the LCD frame and the metal backing plate.

Be sure to get the spudger between the LCD frame and backing plate, and not beneath the plate. Prying up on the plate will damage it, because it is screwed down to the rear case beneath the LCD.

Ваш вклад лицензируется под свободной лицензией Creative Commons.