Помощь
Редактирование шага 11 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 42 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Starting at the top right of the device, slide the spudger in between the LCD frame and metal backing plate, which will separate the adhesive as you push.

The goal is to separate the adhesive, not to pry the LCD up, so keep the pointed tip of the spudger as low as possible to prevent bending the LCD.

If inserting the spudger causes the corner of the LCD to bend up, repeat the steps with the guitar pick to further loosen the adhesive.

Ваш вклад лицензируется под свободной лицензией Creative Commons.