Перейти к основному содержанию
Помощь

iBook G4 12" 800 MHz-1.2 GHz Logic Board Replacement

Редактирование шага 8 —

Тип шага:

Перетащите чтобы изменить порядок

This is a diagram of the ribbon clamp connector you will disconnect in the next step.

1) With your fingernails, grasp the locking bar on either side and pull up a small amount (about 1/16" or 2 mm).

2) After disengaging the locking bar, slide the cable out of the connector.

Ваш вклад лицензируется под свободной лицензией Creative Commons .