Skip to main content
Помощь
Редактирование шага 5 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect the guide that includes this step.

Тип шага:

Перетащите чтобы изменить порядок

Carefully lift the logic board off the heat sink.

If the two components appear stuck together, carefully pry them apart with the flat end of a spudger, being careful not to disturb any surface-mount components on the logic board.

Make sure to apply a new layer of thermal paste before reattaching the heat sink. Our thermal paste guide makes it easy.

Ваш вклад лицензируется под свободной лицензией Creative Commons.