Skip to main content
Редактирование шага 1 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 3 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Use a #1 Phillips head screwdriver to remove the screws on the RAM's cover panel, as seen in image.

Then, use a flat edge tool to pry the cover off, as seen in image.

Use your fingers to push the RAM tabs, as seen in image, that secure the RAM outward (away from the RAM). The RAM should then pop up.

Finally, gently pull the RAM away from the connection. (Repeat this process until all the RAM has been removed from the device).

Ваш вклад лицензируется под свободной лицензией Creative Commons.