Перейти к основному содержанию
Помощь

Removing iPad 3 4G Front Panel

Редактирование шага 3 —

% 1 Примечание:% 2 Сейчас вы редактируете исходное руководство для только что просматриваемого руководства. Любые внесённые вами изменения влияют на все направляющие% 3, включающие данный шаг.

Тип шага:

Перетащите чтобы изменить порядок

There is a small gap in the iPad's adhesive ring in the upper right corner of the iPad, approximately 2.0 inches (~5 cm) from the top of the iPad. You are going to exploit this weakness.

Align the tool with the mute button. Insert the tip of a plastic opening tool into the gap between the front glass and the plastic bezel. Just insert the very tip of the opening tool, just enough to widen the crack.

It may require some force to get the wedged tip of the opening tool between the glass and plastic. Work patiently and carefully, wiggling the plastic opening tool back and forth as necessary.

Ваш вклад лицензируется под свободной лицензией Creative Commons .