Перейти к основному содержанию
Помощь
Редактирование шага 10 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 7 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Use the tip of a spudger to pry the right speaker connector up and out of its socket on the logic board.

Be sure to pry on the cable connector and not on the socket on the logic board. Prying on the socket may cause it to separate from the logic board.

Gently fold the cable up and out of the way of the logic board.

Ваш вклад лицензируется под свободной лицензией Creative Commons.