Перейти к основному содержанию
Помощь
Редактирование шага 4 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Peel up the last of the tape holding the home button ribbon cable in place by inserting an opening pick between the cable and the digitizer.

Continue sliding the pick underneath the cable until it is wholly separated from the front panel

Do not attempt to remove the home button yet. Is is still held in place by a strongly adhered bracket and delicate gasket.

Ваш вклад лицензируется под свободной лицензией Creative Commons.