Перейти к основному содержанию
Помощь
Редактирование шага 1 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 15 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Use the pointed end of a spudger to disconnect the display data connector from its socket on the logic board.

Use the pointed end of a spudger to disconnect the digitizer cable connector from its socket on the logic board.

When reconnecting these, press down from one end of the connector to the other. If you press in the middle of the connector, you may bend it, causing damage or a poor connection.

Ваш вклад лицензируется под свободной лицензией Creative Commons.