Перейти к основному содержанию
Помощь
Редактирование шага 8 —

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Тип шага:

Перетащите чтобы изменить порядок

Slide the blade of a halberd spudger into the opening on the edge of the rear button bracket.

Careful not to push directly against the rear button ribbon cable, to avoid damaging it.

Do not push the spudger in too far, to avoid damaging the rear button.

Continue sliding the spudger blade around the bracket to cut all the adhesive holding the bracket to the rear case.

Remove the bracket.

Ваш вклад лицензируется под свободной лицензией Creative Commons.