Перейти к основному содержанию
Помощь
Редактирование шага 3 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 6 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Lift the DC-In board out of the computer by pulling up and away from you.

If you don't have a 667 MHz computer, there is a fan in this location which makes it a bit difficult to remove the DC-In board.

If there is a fan present, rotate the DC-In board slightly clockwise before easing it out at a slight angle in order to clear the fan clamp on top of it.

Ваш вклад лицензируется под свободной лицензией Creative Commons.