Эта версия возможно содержит некорректные исправления. Переключить на последнюю проверенную версию.
Выберете то, что вам нужно
-
Этот шаг не переведен. Помогите перевести
-
Use a Phillips screwdriver to remove the three 1.3 mm Phillips screws securing the display cable bracket.
-
-
-
Этот шаг не переведен. Помогите перевести
-
Use the flat end of the spudger to disconnect the display assembly connector from the motherboard socket.
-
-
Этот шаг не переведен. Помогите перевести
-
Repeat the previous step for the two remaining connectors.
-