Перейти к основному содержанию

iPhone 5 屏幕更换指南

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 22 руководства, которые включают этот шаг.

Английский
Китайский
Шаг 5
iPhone 5 Screen Replacement: шаг 0, изображение 1 из 3 iPhone 5 Screen Replacement: шаг 0, изображение 2 из 3 iPhone 5 Screen Replacement: шаг 0, изображение 3 из 3
  • Pull the blue handle forwards to lock the arms.

  • Turn the handle clockwise 360 degrees or until the cups start to stretch.

  • Make sure the suction cups remain aligned with each other. If they begin to slip out of alignment, loosen the suction cups slightly and realign the arms.

  • Insert an opening pick under the screen when the Anti-Clamp creates a large enough gap.

  • If the Anti-Clamp doesn't create a sufficient gap, apply more heat to the area and rotate the handle a quarter turn.

  • Don't crank more than a quarter turn at a time, and wait one minute between turns. Let the Anti-Clamp and time do the work for you.

  • Skip the next two steps.

将蓝色手柄向前拉,以锁定双臂。

顺时针旋转手柄 360 度,直到吸盘开始拉伸。

确保吸盘 保持相互对齐。如果它们开始滑出对齐位置,请稍微松开吸盘,然后重新对齐支臂。

当反向钳创造出足够大的间隙时,将撬片插入屏幕下方。

如果反向钳没有创造出足够的间隙,则对该区域施加更多的热量,并将手柄旋转四分之一圈。

每次转动不要超过四分之一圈,每圈之间要等一分钟。让反向钳和时间为你工作。

跳过下边两个步骤

Ваш вклад лицензируется под свободной лицензией Creative Commons .