Перейти к основному содержанию

Notice: You are editing a prerequisite guide. Any changes you make will affect all 15 guides that include this step.

Английский
Французский

Translating step 1

Шаг 1
If necessary, peel back the piece of tape that secures the digitizer ribbon cable to the logic board. Flip up the retaining flap on both of the digitizer ribbon cable ZIF connectors. Flip up the retaining flap on both of the digitizer ribbon cable ZIF connectors.
  • If necessary, peel back the piece of tape that secures the digitizer ribbon cable to the logic board.

  • Flip up the retaining flap on both of the digitizer ribbon cable ZIF connectors.

Si nécessaire, décollez le morceau de ruban adhésif qui fixe la nappe de la vitre tactile à la carte mère.

Retournez le clapet de retenue sur les connecteurs ZIF de la nappe de la vitre tactile.

Ваш вклад лицензируется под свободной лицензией Creative Commons.