Перейти к основному содержанию

Reemplazo de las patas del MacBook Pro Retina 2012-2015

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 10 руководства, которые включают этот шаг.

Английский
Испанский
Шаг 6
MacBook Pro Retina 2012–2015 Feet Replacement: шаг 0, изображение 1 из 3 MacBook Pro Retina 2012–2015 Feet Replacement: шаг 0, изображение 2 из 3 MacBook Pro Retina 2012–2015 Feet Replacement: шаг 0, изображение 3 из 3
  • Align the new foot inside the cavity.

  • Make sure the alignment nub on the foot is lined up with the small hole near the perimeter of the pad.

  • You may want to use a pencil to lightly mark where the alignment nub is located. Be careful not to scratch the lower case with your pencil.

  • Lay the foot down while keeping it properly aligned.

  • Check for proper alignment from the inside of the case. The alignment nub should be slightly visible through the alignment hole.

Alineé la nueva pata dentro de la cavidad.

Asegúrese de que el nudo de alineación este alineado con el pequeño agujero cerca del perímetro de la almohadilla.

Es posible que desees usar un lápiz para marcar ligeramente dónde se encuentra la protuberancia de alineación. Ten cuidado de no rayar la caja inferior con su lápiz.

Pon el pie abajo mientras lo deja alineado correctamente.

Compruebe que la alineación esta correcta desde el interior de la tapa. El nudo de alineación debería de ser visible por el agujero de alineación.

Ваш вклад лицензируется под свободной лицензией Creative Commons .