Перейти к основному содержанию

Sostituzione tasto Home iPad Pro 10.5"

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 3 руководства, которые включают этот шаг.

Английский
Итальянский
Шаг 5
iPad Pro 10.5" Home Button Replacement: шаг 0, изображение 1 из 3 iPad Pro 10.5" Home Button Replacement: шаг 0, изображение 2 из 3 iPad Pro 10.5" Home Button Replacement: шаг 0, изображение 3 из 3
  • Lift the home button bracket starting from the left side.

  • Carefully pull it upwards toward the display, making sure not to damage the home button cable.

  • During reassembly, after installing the home button, you'll need to glue this bracket into place to secure it.

  • Scrape off as much of the old adhesive residue as you can, then clean it with acetone or high-concentration (90% or greater) isopropyl alcohol.

  • Secure the bracket with a high bond glue, superglue, or high-strength double-sided tape. Make sure the bracket is aligned correctly before allowing your adhesive to cure, or the home button will not click when pressed.

  • It may be necessary to use vise clamps to hold the home button bracket in place as the adhesive cures.

Solleva la staffa del tasto Home iniziando dal lato sinistro.

Tirala attentamente verso l'alto, verso lo schermo, assicurandoti di non danneggiare il cavo a nastro del tasto Home.

Durante il rimontaggio, dopo aver installato il tasto Home, dovrai reincollare questa staffa per fissarla.

Gratta via quanto più adesivo puoi, quindi puliscilo con dell'acetone o dell'alcool isopropilico ad alta concentrazione (>90%).

Fissa la staffa con della colla resistente, della super colla, o del nastro biadesivo resistente. Assicurati che la staffa sia allineata correttamente prima di lasciar far presa all'adesivo, o il tasto Home non si premerà.

Potrebbe essere necessario usare dei morsetti per lo schermo per tenere ferma la staffa del tasto Home mentre l'adesivo fa presa.

Ваш вклад лицензируется под свободной лицензией Creative Commons .