Перейти к основному содержанию

Sostituzione gruppo scheda logica MacBook Pro 13" Touch Bar fine 2016

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 2 руководства, которые включают этот шаг.

Английский
Итальянский
Шаг 7
MacBook Pro 13" Touch Bar Late 2016 Logic Board Assembly Replacement, Remove the Thunderbolt port screws: шаг 0, изображение 1 из 2 MacBook Pro 13" Touch Bar Late 2016 Logic Board Assembly Replacement, Remove the Thunderbolt port screws: шаг 0, изображение 2 из 2
Remove the Thunderbolt port screws
  • Using a T3 Torx driver:

  • Remove two 1.4 mm screws from the Thunderbolt port connector bracket on the left.

  • Remove two more 1.4 mm screws from the Thunderbolt port connector bracket on the right.

Usa un cacciavite Torx T3:

Rimuovi due viti da 1,4 mm dalla staffa del connettore della porta Thunderbolt di sinistra.

Rimuovi altre due viti da 1,4 mm dalla staffa del connettore della porta Thunderbolt di destra.

Ваш вклад лицензируется под свободной лицензией Creative Commons .