Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 13 руководства, которые включают этот шаг.
Перевод шага 13
Шаг 13
Install the connector covers
-
Align the back glass connector cover by its screw holes and lay it in place.
| - | [* black] Secure the charging coil connector cover using its slot or hook on the logic board. |
|---|---|
| - | [* icon_note] Refer to your specific phone's replacement guide for detailed instructions on this part. |
| - | [* black] Use your tri-point Y000 driver to install the screw and secure the cover. |
| + | [title] Install the connector covers |
| + | [* black] Align the back glass connector cover by its screw holes and lay it in place. |
Ваш вклад лицензируется под свободной лицензией Creative Commons .