Почините Свои Вещи Сообщество Магазин

Come sostituire l'adesivo del vetro posteriore del tuo iPhone

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 13 руководства, которые включают этот шаг.

Назад к руководству
Английский
Итальянский
Шаг 12
iPhone 16 Pro Max Back Glass Installation, Connect the battery: шаг 0, изображение 1 из 1
Connect the battery

  • Use your finger or a spudger to press and connect the battery press connector onto the logic board.

  • This is a good point to test your repair before sealing up your iPhone. Power on your iPhone and make sure it works as expected. Power it back down and continue reassembly.

  • If your iPhone doesn't turn on, connect it to a power source and try again.

  • If you've replaced the logic board and the screen fails to turn on, you'll need to follow the screen guide to manually connect the display connector.

Collega la batteria

Usa l'estremità piatta del tuo spudger o il dito per ricollegare la batteria.

Inserisci la cover del connettore della batteria nella sua sede sulla scheda logica.

Usa il cacciavite tri-point Y000 per installare le viti e fissare la cover.

Accendi il tuo iPhone e testalo per assicurarti che tutto funzioni prima di richiuderlo. Spegnilo di nuovo prima di completare la riparazione.

[title] Connect the battery
-[* black] Use the flat end of your spudger or your finger to reconnect the battery.
-[* black] Hook the battery connector cover onto its slot on the logic board.
-[* black] Use your tri-point Y000 driver to install the screws and secure the cover.
-[* black] Power on your iPhone and test it to make sure everything works before sealing it up. Power it back down before finishing this repair.
+[* black] Use your finger or a spudger to press and connect the battery press connector onto the logic board.
+[* icon_note] ***This is a good point to test your repair before sealing up your iPhone. ***Power on your iPhone and make sure it works as expected. Power it back down and continue reassembly.
+ [* icon_note] If your iPhone doesn't turn on, connect it to a power source and try again.
+ [* icon_note] If you've replaced the logic board and the screen fails to turn on, you'll need to follow the [guide|178634|screen guide|new_window=true] to manually connect the display connector.

Ваш вклад лицензируется под свободной лицензией Creative Commons .