Перейти к основному содержанию

Instalación de la pantalla del iPhone 16

Примечание: Вы редактируете необходимое руководство. Любые внесенные вами изменения повлияют на руководство, которое включает эту стадию.

Английский
Испанский

Перевод шага 1

Шаг 1
iPhone 16 Screen Installation, Remove the screen adhesive: шаг 0, изображение 1 из 3 iPhone 16 Screen Installation, Remove the screen adhesive: шаг 0, изображение 2 из 3 iPhone 16 Screen Installation, Remove the screen adhesive: шаг 0, изображение 3 из 3
Remove the screen adhesive
  • Be careful not to damage any of the spring contacts as you clean the frame.

  • This is a good point to test your repair before sealing up your phone. Connect the screen, power on your phone, and make sure it works as expected. Power it back down, disconnect the battery and back glass, and continue reassembly.

  • The adhesive remaining on your phone is difficult to remove and leaves residue. If you have trouble removing the adhesive, apply some heat using a hair dryer or heat gun.

  • Use a spudger to push the screen adhesive up until you can grab it with a pair of tweezers.

  • Use a pair of tweezers to remove the adhesive around the entire perimeter of the iPhone.

Ten cuidado de no dañar ninguno de los contactos de resorte mientras limpias el marco.

Este es un buen momento para probar la reparación antes de sellar el teléfono. Conecta la pantalla, enciende el teléfono y asegúrate de que funciona como se espera. Apágalo nuevamente, desconecta la batería y el vidrio trasero y continúa con el reensamblaje.

El adhesivo que queda en el teléfono es difícil de quitar y deja residuos. Si tienes problemas para quitar el adhesivo, aplica un poco de calor con un secador de pelo o una pistola de calor.

Usa un spudger para empujar el adhesivo de la pantalla hacia arriba hasta que puedas agarrarlo con un par de pinzas.

Usa un par de pinzas para quitar el adhesivo alrededor de todo el perímetro del iPhone.

Ваш вклад лицензируется под свободной лицензией Creative Commons .