Примечание: Вы редактируете необходимое руководство. Любые внесенные вами изменения повлияют на руководство, которое включает эту стадию.
Перевод шага 5
Шаг 5
-
Use your finger or a spudger to press and connect the three black press connectors onto the logic board.
| - | [* red] Use a spudger to pry up and disconnect the ***three*** black connectors that were previously tucked under other connectors. |
|---|---|
| + | [* red] Use your finger or a spudger to press and connect the ***three black press connectors*** onto the logic board. |
| + | [* icon_note] To re-attach [guide|25629|press connectors|stepid=70308|new_window=true] like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Don't press down in the middle. If the connector is misaligned, the pins can bend, causing permanent damage. |
Ваш вклад лицензируется под свободной лицензией Creative Commons .