Почините Свои Вещи Сообщество Магазин

iPhone 16 Pro Max Logic Board tauschen

Примечание: Вы редактируете необходимое руководство. Любые внесенные вами изменения повлияют на руководство, которое включает эту стадию.

Назад к руководству
Английский
Немецкий
Следующий шаг

Перевод шага 1

Шаг 1
iPhone 16 Pro Max Logic Board Installation, Connect the front sensor cable: шаг 0, изображение 1 из 1
Connect the front sensor cable

  • Hold the logic board so that the front sensor cable is close to its connector.

  • Align the front sensor cable connector carefully over its logic board socket.

  • Use the point of a spudger or your finger to press the connector until it clicks into place.

  • Don't try to force the connector into place. If you're having trouble, reposition it and try again.

Tipps zum Zusammenbau

Die nächsten beiden Schritte enthalten Tipps zum Wiedereinbau des Logic Boards.

Um das Kabel zum Frontsensor unten am Logic Board wieder anzuschließen musst du den Stecker sorgfältig ausrichten und mit dem Finger andrücken.

Wenn du das Logic Board wieder an seinen Platz legst, achte darauf, dass kein Kabel eingeklemmt wird.

-[title] Reassembly tips
-[* icon_note] The next two steps contain tips to help you reattach the logic board.
-[* icon_reminder] To reattach the front sensor cable to the underside of the logic board, carefully align the connector and press it down with your finger.
-[* icon_reminder] When you lay the logic board back in place, make sure no loose connectors are trapped underneath it.
+[title] Connect the front sensor cable
+[* black] Hold the logic board so that the front sensor cable is close to its connector.
+[* black] Align the front sensor cable connector carefully over its logic board socket.
+[* black] Use the point of a spudger or your finger to press the connector until it clicks into place.
+ [* icon_note] Don't try to force the connector into place. If you're having trouble, reposition it and try again.

Ваш вклад лицензируется под свободной лицензией Creative Commons .