Почините Свои Вещи Сообщество Магазин

iPhone 16 Pro Max Logic Board tauschen

Примечание: Вы редактируете необходимое руководство. Любые внесенные вами изменения повлияют на руководство, которое включает эту стадию.

Назад к руководству
Английский
Немецкий
Шаг 3
iPhone 16 Pro Max Logic Board Installation, Install the logic board: шаг 0, изображение 1 из 1
Install the logic board

  • You can't directly connect the display connector to the bottom of the logic board without removing the screen, but you might successfully connect it by screwing the logic board in place. Be sure to test your iPhone before you seal it up.

  • Make sure the logic board rests in place against its screw posts. The posts will properly align the board to the display connector underneath it.

Вставьте перевод здесь

Es ist nicht möglich, den Displaystecker unter dem Logic Board direkt einzustecken, ohne das Display zu entfernen. Du kannst ihn aber erfolgreich anschließen, wenn du das Logic Board festschraubst.

Achte darauf, dass das Logic Board richtig auf seineb Schraubenpfosten sitzt. Die Pfosten führen das Logic Board so, dass der Displaystecker darunter genau passt.

Setze den Zusammenbau fort, bis der Akku wieder verbunden ist. Schalte das iPhone an und schaue nach, ob das Display funktioniert. Wenn das Display nicht angeht, folge der Anleitung für das Display, um den Displaystecker wieder anzuschließen.

-[* icon_reminder] You can't directly connect the display connector to the bottom of the logic board without removing the screen, but you may successfully connect it by screwing the logic board in place.
- [* red] Make sure the logic board rests in place against its screw posts. The posts will properly align the board to the display connector underneath it.
- [* black] Continue with reassembly until you've reconnected the battery. Try to power on the iPhone to see if the screen's connected. If the screen fails to turn on, follow the [guide|178634|screen guide|new_window=true] to manually reconnect the display connector.
+[title] Install the logic board
+[* icon_note] You can't ''directly'' connect the display connector to the bottom of the logic board without removing the screen, but you might successfully connect it by screwing the logic board in place. ***Be sure to test your iPhone before you seal it up.***
+[* red] Make sure the logic board rests in place against its screw posts. The posts will properly align the board to the display connector underneath it.

Ваш вклад лицензируется под свободной лицензией Creative Commons .